1. Welcome to 28DaysLater.co.uk - 28DL - The UK Urban Exploring / Urban Exploration / Urbex Forums.

    Asylums and Hospitals, High Stuff, Industrial, Leisure Sites, Residential Sites, Military Sites, Mines and Quarries, ROC Posts, Theatres and Cinemas, Draining, Underground Sites, European and International Sites, Leads, Rumours and News, Kit, Clothing, Equipment, Photography and Video sections plus a lot more.

    Please feel free to browse this website as a guest. Creating an account removes some ads, allows you to post replies, start new topics and threads, and gives you access to more features including bookmarking, live chat, messaging and notification systems.

    Create an account | Login | Request new password

Report - Rhiwbach Slate Mine - Aug. 2009

Discussion in 'Mines and Quarries' started by BenCooper, Sep 3, 2009.

  1. BenCooper

    BenCooper Mr Boombastic
    Regular User

    Joined:
    Aug 30, 2008
    Messages:
    460
    Likes Received:
    22
    Home Page:
    This was a trip organised on Adit Now - many thanks to Simon for being such a good guide :) This mine is very securely gated - it's not possible to get in unescorted.

    [​IMG]

    A wee lesson on slate mining for the beginner. Feel free to ignore or correct.

    Slate quarrying and mining, on both the surface and underground, follows a similar pattern. Horizontal paths/tunnels called levels carry tracks, which link up with angled ramps/tunnels called inclines. Slate is quarried in galleries, when underground separated by pillars to hold up the roof. The ratio underground is usually 80ft of gallery separated by 80ft of pillar. In the gallery, first a roofing tunnel is driven up the top of the slate layer, then the roof is brought down in sections using gunpowder packed in drilled holes. The large slabs are then moved along the levels and inclines to working areas outside for converting into slates - waste is also removed to tips.

    Rhiwbach slate mine is built on the other side of the mountain to Blaenau Ffestiniog - the Penmachno valley doesn't have any good transport links, so unusually the slate from Rhiwbach and nearby mines has to first go up to the top of the mountain then down the other side to the narrow-gauge railway at Blaenau. For significant periods of Rhiwbach's life, it made more money from transporting other companies' slate on it's inclines than it made from it's own slate.

    We entered through the half-mile-long drainage tunnel - built by hand, it's dead straight and very accurately sloped at 1-in-1000 - an impressive feat. One slab truck still sits on the tracks.

    [​IMG]

    [​IMG]

    The galleries are truly impressive - more so when you realise that they were dug mostly by hand, by candlelight.

    [​IMG]

    For much of the quarry's life, holes for gunpowder were drilled by hand using a tool called a jumper - simply a steel rod about 6' long with a sharp end. This was simply walloped into the rock - wallop, half turn, wallop, half turn, repeat for an 8-hour shift, and you had one hole. These guys worked hard! Then, once you had a series of holes, you packed gunpowder into the holes using a copper tamper rod which wouldn't produce sparks - in dim candlelight it sometimes happened that a miner mixed up the tamper and the jumper, with sometimes fatal consequences.

    [​IMG]

    A little further along, one of the lower galleries is completely flooded - it can be crossed by inflatable rowboat. The roof in this area is quite delicate, so silence is a good idea.

    [​IMG]

    A little further on, our route goes past this deep sink - the ledge on the left does have a rope to hold on to.

    [​IMG]

    Looking back, and with the aid of a very powerful torch on a piece of string, you can see how deep this sink is, and you realise that the rock which seemed so solid on the other side is really a thin shelf over a hundred feet of water.

    [​IMG]

    Up on the next level, and another gallery - this is the height of the sink we were standing over on the level below. You also get an idea of how brave these miners were - they worked on these rockfaces by candlelight, with at most a piece of hanging rope or chain to wrap around one leg as a safety backup. Just as daring were the surveyors who studied the quality of the rock - to cover large areas, they would climb on a giant free-standing ladder held up by four ropes - men below would pull the ropes to swing the surveyor from one side of the chamber to another, so he could inspect the roof and walls by the light of his candle.

    [​IMG]

    There was another flooded gallery on this level - again with a narrow path past.

    [​IMG]

    There are still quite a few tools and artifacts left - here are some collected together. A couple of oddities here - the notched stick is a slate measurer and the flat thing at the back is a trimming knife - both tools would normally only be used on the surface, so it's odd to find them down here.

    [​IMG]

    Back to the incline again - it's possibly confusing, but the incline slopes from lower left to upper right. At this point is possibly where one of the two fatal accidents recorded for this mine occurred. Simple electrical buzzers were used to control the incline wagons - a signal was misunderstood, and a wagon descended at speed, crushing a miner. Just 'cos you asked, the other accident was on the surface when a snapped wire rope sliced a miner in half. Nice. This mine was actually very safe by the standards of the industry, though - only two recorded fatalities in about 70 years of operation is not bad.

    [​IMG]

    Finally up to the highest level, and one more slab wagon.

    [​IMG]
     

    Remove this ad by donating or subscribing.

Draft saved Draft deleted
Loading...

Users Who Have Read This Thread (Total: 0)

Share This Page

Remove this ad by creating an account and logging in