real time web analytics
Report - - Basingill Gunpowder Works (Cumbria, Jun, 2020) | Industrial Sites | 28DaysLater.co.uk

Report - Basingill Gunpowder Works (Cumbria, Jun, 2020)

Hide this ad by donating or subscribing !

urbanchemist

28DL Regular User
Regular User
Another industrial archeological wander with the dog on a very sunny afternoon, shortly after revisiting the New Sedgwick Gunpowder works.

Background. There were three gunpowder works on the River Kent, all close together: New Sedgwick, Old Sedgwick (of which little now remains) and Basingill.
Basingill was unusual in that it was not a complete works but was built (1790) to supplement the incorporating mills at Old Sedgwick (incorporating mills were where the gunpowder ingredients were ground together).
When Old Sedgwick closed in 1850 Basingill continued to supply another factory at Gatebeck a few miles away.
After all the gunpowder works shut in 1935 the wooden-framed mill buildings were burned to remove traces of gunpowder, leaving just the stone lower storeys, blast walls and the water supply system.

There are three blocks of mills, A-C on the map below, each of which had a water wheel.
Water was channeled to B and C by a tunnel from A. The site is in a quarry full of trees and scrub although part of it was once (1820) a formal garden for Sedgwick House.
The land belongs to the Environmental Agency, who maintain a fish monitoring station here.

49998322966_af1659dcf3_b.jpg


Looking downriver towards A, there used to be weir at about this spot to channel water to the left of the rocky platform.

49998322931_6d8bbfc812_b.jpg


Getting closer, some of the water went down the tunnel in front, now blocked….

49997800803_0e9328bc23_b.jpg



49998574102_437852ff82_b.jpg


…the rest made a right turn between two outcrops.
I initially thought there must have been a ginormous wheel here, but an English Heritage reconstruction shows that a couple of walls on either side of the channel are missing.
The large stone bases on either side were for mounting mill machinery, not the wheel axle.

49997800743_b27320d6df_b.jpg



49998322841_288e1ed591_b.jpg



49997800698_acb71e41bb_b.jpg


Moving on to B, the wheel pit in the middle is partly filled in but has a curved profile at the back to fit the wheel, with openings either side for the axle.
The water tunnel at the back is blocked off after a couple of meters.

49997800693_dbf343dde2_b.jpg



49997800648_939cd1b263_b.jpg



49998573952_6e96ac1033_b.jpg


Block C is the largest, and like B has axle openings and a profiled wheel pit.

49998573922_9204855baf_b.jpg



49997800568_c899925f09_b.jpg



49998322641_6978ae58fb_b.jpg


The most interesting feature here was the slatted object on the ground, part of a Rennie’s Hatch.
This was a type of overflow sluice used to increase the efficiency of breast-shot water wheels.
The iron slats - some of which are missing - were mounted vertically in front of the sluice to direct the water flow.

49997800518_d70dc45cf3_b.jpg


An illustration showing a Rennie’s Hatch with two movable sluice boards - these were sometimes used in large textile mills with a feedback mechanism (governor) connected to the sluice to produce a steady power output.

49998322581_885c3f8c5e_b.jpg


The tunnel at the rear leads round to the blockage at B - concrete was apparently poured in when part of the tunnel collapsed during heavy flooding.

49997800438_a1b747ee4b_b.jpg



49998322526_268b3c8c73_b.jpg



49998322496_be86c054b6_b.jpg


A final view upriver towards Force Bridge - the water level was low when I visited, although there was apparently always enough for the three wheels.
In winter this gorge can be a bit of a torrent, popular with whitewater kayakers.

49998573707_a59f88cac0_b.jpg
 

Who has read this thread (Total: 155) View details

Top